Construction method of artificial turf, which is characterized by:
1, rolling: sanded on artificial turf after rolling, rolling machine does more than 100 tons, before and after rolling gasoline.
2. Shop pads: In the backfill sand gravels capped pads, pad thickness 6-8 cm, pads rubber content of 25-35%, 65-75% of plastic foam pad edge fixed with nails, iron nail length 10 cm, nails spaced 18-22 cm, connecting seams with tape, plastic bandwidth 12-17 cm.
3, backfill sand stone layer: 5-7 cm thick sand backfill gravel layer on natural soil base, gravel diameter of 0.1-1 cm, 25-35%, 25-35% sand, 35-45% of soil, use flat electric vibration Compactor compaction, compaction process of continuous spray of water, humidity of 8-12%.
4, lawn sand: artificial turf capped with sand, quartz sand is made by grinding, sanding thickness of 2.7 -31 cm thick.
5, the base rafters dig: 20 cm natural base soil excavation, screening out more than 1 cm of gravel, then backfill and compaction, compaction density of 80-95%, consolidating the process of continuous spray of water, humidity 8-10%, using flat electric shock Compactor compaction.
6, lawn: the pads capped lawns, turf wire length 3 cm, lawn edges with a nail fixed, 10 cm long nails, nails spaced 10 cm seams with latex adhesive, glue width at 28 -32 cm, lawn grass specifications 100% polypropylene yarn, wire spacing 0.9525 cm high 30 cm weight 3.82 kg per square meter at the bottom of the composite non-woven fabric plus mesh bottom three environmentally friendly latex primer.