Construction of artificial turf adhesive note |
Construction of artificial turf adhesive note
News Source:Wuxi Leisutan Artificial Turf Co.,Ltd -
a, glue: use plastic artificial turf surface at brushing, thickness should be uniform, careful not to repeatedly gluing, otherwise there will be blistering, or even fall. Required when the base fabric glue applicator, and strictly control the thickness of the glue, coating speed should be appropriate, it should be noted are evenly coated with the two bonding surface.
b, bond: Under the influence of temperature, humidity, pressure and other factors, to make reasonable control of open time, generally within 10-30 minutes after the glue, mortar achieve 80-90 percent better feel sticky. Then use sticky seam is required careful operation, one aligned with cement, must move several times or repeatedly exposing sticky artificial turf, making it lose the best bonding time and unglued.
c, pressure: After bonding artificial turf, with a special adhesive rubber hammer hammering at the both sides of the square compacted, making full contact with the surfaces of artificial turf density, increased fastness.
d, curing: time is generally 3 days, the ultimate strength was detected after 10 days. Therefore, in this period need to pay close attention to curing artificial turf maintenance, avoid exposure, flooding and displacement. Affect bond fastness.
e, cleanup: Before sanding and particles are not required to use imported cleaner cut on the artificial turf of the site be cleaned of debris.
Copyright © 2012 Wuxi Leisutan Artificial Turf Co.,Ltd.  All rights reserved