(-) to the field

1, site specifications

Rectangle, 25 meters long, 20 meters wide. Can also be smaller, 20 meters long and 15 meters wide. The attachment said around the line, the line.

Around 2, field, the expansion of the 1 m, namely, 27 meters long, 22 meters wide, and 22 meters long, 17 meters wide. At four o 'clock the attachment limit line.

3, line drawing. Line width is 2 cm, margin of error + / - 0.5 cm. Line is included in the site area, marked by leucorrhea.

4, field Angle. Site has four corners, long term to the right angles to the first corner. The rest in turn counterclockwise direction orientation Angle of the second and third Angle, the first four corners.

5, the starting line. From the first DNA is the top 1-3 meters long line as the starting line, the color of the starting line shall be the boundary a significant difference between the two.

6, the goal. The field, has three goal. First goal starting line 4 m, with long line parallel to the goal line center and line distance is 2 meters wide. Goal made with a diameter of 11 mm round metal, 20 cm high (from the ground up), 22 cm wide. Attachment is called the goal line, line between the two columns 1 cm wide. A goal kick column wants firm nail into the ground. 2 door is located in the starting line across the long boundary, is apart from the third angle-angle top 10 meters (small venues 8 meters), the goal line center distance line 2 meters long, the goal and wide

Parallel lines. The third door, in the middle, the starting line, long line on the left of the goal line center distance line 2 meters long, the goal and the wide margin line parallel to the goal of specifications with the first door.

7, at the end of column. The end column is located in the four corners of the diagonal intersection, made with 2 cm in diameter round flat metal, 20 cm high (from the ground up), solid nail into the ground.

(2) equipment

1, the bat. Is composed of the handle and the hammer head, there is no limit on the weight, handle not less than 70 cm long, the hammer head is cylindrical, 24 cm long, 4.5 cm in diameter. The hammer head should be made of wood mixed with synthetic resin materials. Both ends must not have metal additions, end face for the plane.

2, the ball.

1) made of synthetic resin. Smooth surface, 7.5 cm in diameter, weighs 230 grams, and allowed error of plus or minus 10 grams.

2) share out bonus, white two color, 5 each. Both sides of the spherical symmetry to write, red ball white number 1, 3, 5, 7, 9 and white balls red number 2, 4, 6, 8, 10. Not less than 4 cm x3.5 number specification, stroke width not less than 0.8 cm.